ESSVE Countersunk Wood Screw – Zinc Plated

Wood Screw, Countersunk Head, Bright Zinc Plated

CE European Certification

Class for corrosion resistance:
C1 for indoor use

Approval Logo
Approval Logo

The screw is produced in hardened carbon steel with bright zinc plated surface treatment. Fitted with TX-drive/bits. The screw has two fibre cuts. This means a very low drive-in torque in harder materials and minimises splitting. On screws longer than 160 mm, there is an additional fibre cut directly after the usual wood thread, this is to facilitate installation of longer and thicker screws. The head is equipped with six cutting grooves that countersink the head, leaving a smooth finish without splinters. The screw conforms to the CE requirement as per EN14592.


ESSVE’s Wood screw with two fibre cuts intended for most installation work in particle boards, wood, plastic, plug, etc.


Recommended rpm: 400-1200/min

Item code Description Size Driver Finish Pcs. per box
116107 Countersunk 3.5mm x 25mm Torx 10 Zinc plated 200
116108 Countersunk 3.5mm x 30mm Torx 10 Zinc plated 200
116108 Countersunk 3.5mm x 40mm Torx 10 Zinc plated 200


Where to buy

To find out where you can purchase our products

Click Here

Our Brands